Get matched with top interior painters in Wisner, LA

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

There are times when you should remove all exterior paint before repainting. This includes when you need to get rid of lead-based paint (which should be done by a pro), or if you need to apply a different finish than what’s already there. Your house may also have too many pre-existing layers of old paint, in which case you’ll be better off getting rid of the old layers first.

Using a wire brush, forcefully scrub the surface to remove paint from metal. You’ll want to remove any lingering rust, too. For larger areas with caked-on rust, you may need to use a wire brush drill attachment. If the paint still won’t budge, apply a chemical paint stripper to the area and scrape off the paint, after following the paint stripper’s instructions.

In many cases, professionals can completely remove certain types of smoke damage from walls and ceilings, but it’s only possible if the damage is minor. For more extensive damage from major fires, you’ll likely need to replace the damaged materials entirely. Some items, like upholstered furniture, are much trickier to clean and might need to be replaced even if the smoke damage is minimal.