Get matched with top masons in Mer Rouge, LA

The best type of rock for landscaping depends on your needs. If you want to build an affordable driveway, consider gravel. If you want an aesthetically pleasing patio, you can’t go wrong with flagstone. If you’re building a water feature, consider river rock as the base. Start by figuring out your landscaping project, then choose the best rock for that project.

Yes, it’s usually possible to repair damaged brick mailboxes. If the masonry is damaged, the brick can be cut out and replaced, or the mortar joints can be cut out and retucked. However, the new mortar will likely be different in color from the original mortar joints. In most cases, if the mailbox itself is damaged, it’s possible to cut it out and replace it. Consult a masonry contractor to determine whether it’s worth repairing your brick mailbox based on its value and amount of damage.

The cost of masonry work varies widely depending on the type of masonry along with common cost factors like size, complexity, location, and season. Most exterior masonry work done in freezing temperatures tends to cost more because of the preparation and protection involved to keep the masonry from freezing before the mortar cures properly. The average price ranges per project or square foot for different types of masonry include:

• Brick wall (fence, garden wall, etc.): $10–$45 per square foot

• Natural stone wall: $40–$110 per square foot

• Manufactured stone veneer: $20–$40 per square foot

• Brick home exterior: $10–$30 per square foot

• Brick siding: $3–$10 per square foot

• Stone siding: $35–$50 per square foot

• Brick step replacement: $20–$30 per square foot

• Brick wall repair: $20–$40 per square foot

• Chimney repairs: $160–$750 per project

• Tuckpointing: $5–$25 per square foot

Yes, you can do German schmear on stone. You can account for the more textured and rough surface of stone by using a large paintbrush instead of a putty knife. A brush allows you to drag mortar across the stone to get it into all the cracks and crevices. However, a brush will cover more of the surface, so you may need a wet sponge to scrub excess mortar and expose more of your stone.