Get matched with top affordable plumbers in Kinder, LA

Even if the shower drain doesn’t seem clogged or dirty, plan to clean it out about once per month—or more frequently if you or your family shed a lot of hair. It’s a good practice to remove any hair from the drain on a daily basis, as hair can accumulate fast and cause clogs in no time. You may also want to have a plumber thoroughly clean the drains in your home once every six months.

You can tell if your toilet fill valve is full by removing the lid and taking a look. When you flush the toilet, the float is at the bottom of the tank, the water empties, and the fill valve opens. The float rises to the top as the tank fills again with water. When the float rises to the right level, the fill valve closes; if the valve is too high, your toilet may only partially flush, requiring you to adjust the float. 

You should never pour antifreeze down the drain or outside on the ground. Because it's highly toxic, antifreeze can still impact people and animals long after it drains. Antifreeze can contaminate water and sewage systems, and any that gets into storm drains and water supplies can attract animals and harm those that ingest it.

In general, PVC (polyvinyl chloride), PEX (polyethylene), and copper are the three piping materials used in new constructions when adding water supply lines. There are some caveats. PEX and copper are considered ideal when running lines that will handle hot water because they are not at risk for melting and warping the way that PVC piping can. At $0.40 to $4 per linear foot, PEX is considered more affordable than copper pipes, which cost $2 to $12 per linear foot. PVC is considered appropriate in water lines for cold taps only.