Best countertop and backsplash pros near Hammond, LA

Caesarstone® offers both quartz and porcelain counters, which are types of engineered stone countertops. Generally, you can expect to pay $50 to $200 per square foot for quartz countertops. If you decide to go with Caesarstone® quartz counters, then you’ll pay $75 to $125 per square foot, which is in the mid-range of what most quartz manufacturers charge.

Additionally, Caesarstone® is typically less expensive than quartzite, which is a natural quartz countertop that costs $80 to $220 per square foot. Depending on the Caesarstone® countertop you choose, you may spend significantly more on quartzite counters.

There are several countertop options available to fit your lifestyle and needs. 

• Granite countertops are durable and come in a variety of colors.

• Soapstone countertops are prone to scratches and best in smaller kitchens.

• Marble countertops are less durable than granite but a good option for busy kitchens.

• Slate countertops are stain-resistant, making them easy to clean.

• Limestone countertops must be sealed often to prevent scratches.

• Acrylic countertops cost less than granite while still providing durability.

• Laminate countertops are the most affordable but chip and fade faster.

• Wood countertops need monthly sealing to maintain.

Yes, you can generally put hot pans directly on a granite countertop without worrying about cracking, as it is a durable, heat-resistant stone that can withstand high temperatures. However, it is still highly recommended to use a trivet or hot pad as a precaution. Prolonged or repeated exposure to high heat can potentially cause discoloration or damage the countertop's sealant, making it more susceptible to staining. Additionally, the heat from a pan can transfer to the granite, creating a burn hazard for anyone who touches the surface shortly after.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.