Get matched with top masons in Glenmora, LA

Yes, it’s a good idea to use paint primer on your brick fireplace before painting it. Brick is highly absorbent, so your first few coats of paint will likely seep into the surface of your fireplace, allowing the natural color of the brick to seep through. To avoid this, you’ll want to use one or two coats of primer, followed by the topcoat. 

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

Choose from an abundance of natural and synthetic options when perfecting your hardscape design. Stone veneer costs a bit less, holds up against the tests of time and weather, and also works best in curves and complex walls.

Natural stone, however, provides an organic look to a lawn while providing just as much strength as veneer. Don't forget you can chat with your mason about other common wall materials like brick, cinderblock, and concrete.

It is possible, albeit a lot slower, to break up a rock using water. You would do this by freezing and thawing the water. You could create some initial holes or cracks in the rock, then pour water into the cracks or holes and allow them to freeze (so it's best to do this in winter or in colder climates). Since water expands when it freezes, this puts pressure on the inside of the rock and causes it to crack. You could continue to pour more water in and let it freeze to continue to break up the rock.