Get matched with top woodworkers in Gilbert, LA

On average, the cost to hire a carpenter ranges from about $75 to $100 per hour, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.

Floor joists provide support and stability to the flooring installed above them, whether it be hardwood, tile, or carpet. They’re essentially horizontal beams that hold up the subfloor and everything that lies on top of it. Floor joists also help evenly distribute weight across their structure so that it’s shared between walls, beams, and your foundation.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.