Top-rated drywall pros.

Get matched with top drywall pros in Eros, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall service project in Eros, LA?

Select your specific project to find the pro for you.

TRUSTED BY EROS, LA HOMEOWNERS

  • Average homeowner rating star icon4.9
    Average homeowner rating
  • Verified reviews icon11
    Verified drywall services reviews

Find Drywall pros in Eros

Avatar for CMS-Handyman, LLC
CMS-Handyman, LLC
5.0(
1
)
Drywall - Repair

Serving Eros, LA and surrounding areas

Approved

In business since 2021

Free estimates

Customers say: Quick response

CMS-Handyman L.L.C. is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests and make their concerns the basis of our business.

Interior Remodel
Interior Remodel
Interior Remodel
Interior Remodel
Interior Remodel

+62

Response time2 days
Recommended by100%of homeowners
Avatar for All in One S & P Contracting Services, LLC
All in One S & P Contracting Services, LLC
4.3(
18
)
Drywall - Repair

Serving Eros, LA and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"Not only did S&P provide the smaller things but when asked to price and complete a covered gazebo on a concrete slab with a retaining wall around half of it they not only provided a good price but a good finished quality product as well. I would recommend S&P for any of your needs big or small. P.s. I wish I had pictures of before and after work but they were not on a cloud but on my old phone."
Ramp Built and Stained
Ramp Built and Stained
Ramp Built and Stained
Ramp Built and Stained
Ramp Built and Stained

+3

Response time1 day
Response rate99%
Recommended by81%of homeowners
...
Showing 1-10 of 103
Drywall questions, answered by experts

The two most common drywall thicknesses for ceilings are 1/2-inch and 5/8-inch. For most standard residential applications, 1/2-inch drywall is sufficient and widely used. It provides adequate support and is lighter and easier to handle during installation compared to thicker sheets. However, 5/8-inch drywall is often used for specific cases where additional benefits are needed. It is heavier but provides superior sound dampening and fire resistance. You should consider using 5/8-inch drywall for ceilings in commercial buildings, between a garage and a living space, or above a finished basement to meet building codes or for enhanced soundproofing.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

A common cause of separation between a wall and the ceiling is truss lift—this can happen to the ceiling of rooms directly under the attic when the seasons change and wood building materials dry out, shrink, and shift. Roof trusses often dry out at different speeds, and if the bottom pieces dry out faster than the top pieces, they can shrink and pull the attached drywall away from ceilings and walls, causing cracks. Fortunately, truss lift is only a cosmetic problem, not a structural problem, and you can fix it by separating the ceiling drywall from the roof trusses, and patching the cracks.

A 50-pound mirror can be hung on drywall, but only if it has the support of strong hardware. Ideally, you can find the studs behind the drywall and attach the mirror to them; this will give your mirror better stability. Otherwise, confirm that you are using anchors appropriate to the weight of the mirrors. Another technique is to use French cleats—two pieces of wood that fit together, with one piece attached to the wall and the other to the mirror. This allows the weight to be distributed over a wider area.

It’s less costly to drywall a fireplace than shiplapping it since material costs are higher for shiplap. However, if you’re DIYing the project, shiplap is less expensive since you won’t have to pay for labor. With drywall, getting a smooth finish is difficult unless you’re a pro. Shiplap is ideal for an accent wall or unique space, such as around a fireplace, since it adds texture and gives off a cozy vibe.

The Eros, LA homeowners’ guide to drywall services

From average costs to expert advice, get all the answers you need to get your job done.