Get matched with top stone and gravel pros in Elm Grove, LA

Depending on the amount of soot present, you can vacuum some of it using a brush attachment on your vacuum cleaner. Then, remove the leftovers with a mild cleaner, such as dish soap or vinegar mixed with water. Before applying a cleaning solution, saturate the bricks with clean water to prevent the cleaner from penetrating beyond the surface and causing structural damage to the bricks.

For most masonry cleaning jobs, you should use a masonry sponge and a gentle cleaner like dish soap, vinegar, or a dedicated fireplace or masonry cleaner. Harsher bleach-based or ammonia cleaning agents should only be used if necessary and never mixed together.

Brick spalling—which refers to the crumbly, flaky, or pitted appearance that can develop over time—is caused by a few different conditions. These include:

• Climates with constant freeze-thaw cycles

• Use of non-breathable sealants

• High-pressure water cleaning

• Improper installation

While you can’t do anything about the weather, you can preserve your bricks by cleaning them with soapy water and a good old-fashioned scrubbing. Pressure washers may be satisfying to use, but they can eventually wear away the surface of your bricks. If you don’t have advanced-level DIY skills in masonry, you can hire a reputable masonry contractor in your area for your project.

Handbuilt masonry fireplaces are likely what comes to mind when we think about curling up by the fire at the end of the day. But bricks in the firebox and chimney tend to be heavy, which is not ideal for homes with weak or damaged foundations.

Prefabricated fireboxes come with a full flue and chimney system, significantly reducing the price and installation time. However, if you need to replace the panels down the line, you are locked into the same model or something very similar.