Get matched with top sink installation pros in Chatham, LA

Putting in a new bidet attachment or seat requires as little as 30 minutes. Installing a full bidet toilet or stand-alone bidet might take one to three hours. Additionally, if you need a GFCI outlet installed, that can take 30 minutes to three hours depending on the complexity of the job.

Yes. You can replace just the stopper portion with a universal sink stopper. All you need to do is open up the existing stopper and pull it up from the drain. You should be able to remove and replace the stopper with bare hands. If the existing stopper seems to be stuck, use a pair of pliers to remove it.

Yes, a toilet, sink, and shower can share the same vent. This is a common installation method that can simplify plumbing and save space. However, there are important considerations. The vent and associated plumbing must be large enough to handle the demands of all fixtures without compromising the vent's effectiveness. Additionally, the toilet should always be located downstream of all other fixtures. Because requirements can vary and space might be limited, it is essential to check your local building and plumbing codes and consult with a qualified plumber to ensure the installation is done correctly.

For safety when installing a vanity, attaching the vanity to the wall is ideal to prevent it from moving. Typically, sinks must be 4 inches away from bathtubs. Also, most states require that you have 21 inches in front of a sink, but the National Kitchen and Bath Association (NKBA) recommends 30 inches for more comfort.