Get matched with top gate repair pros in Cunningham, KY

Gates are often stuck halfway due to physical blockages or damage to the rollers, wheels, or tracks the gate runs on. Check to make sure there are no obstructions before considering that the motor might be burned out or malfunctioning somehow. Hopefully, the issue is simple, and you can remove it with a broom or your hands, but if your gate is stuck and there's no obvious reason why, you should call a pro to diagnose the issue.

Automatic gates don’t use too much electricity, and you should see a minimal effect on your utility bill. In fact, certain gate systems are entirely self-sufficient and rely on solar panels attached to or near the gate to power the motor. While a gate is large and there is a powerful motor moving it, it’s not something that sees constant use throughout the day. For most automatic gates, expect to see a utility bill increase of only around $10 per month.

Yes, most electric and automatic gates can be opened manually. They are equipped with a manual override or release mechanism that detaches the motor from the gate, allowing it to be moved by hand. This feature is essential during power outages or other emergencies.

To activate the manual override, you will typically need a specific key or tool. In some cases, you may also need a screwdriver to remove a cover to access the release mechanism. The use of a key is a common security measure to prevent unauthorized individuals from manually opening the gate.

Because every model is different, it is highly recommended to consult your gate's user manual to familiarize yourself with the specific procedure before you need to use it. Keep any necessary keys or tools in an accessible location. Be aware that automatic gates can be very heavy, so opening and closing them manually may be difficult.

In North America, electric gates are also subject to the UL 325 Standard for Safety, which includes provisions to allow emergency responders to access the property.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.