Top-rated deck cleaning pros.

Get matched with top deck cleaning pros in Satanta, KS

Enter your zip and get matched with up to 5 pros

Need a pro for your deck cleaning project in Satanta, KS?

Select your specific project to find the pro for you.

Find Deck cleaning pros in Satanta

Showing 1-10 of 11
Deck Cleaning questions, answered by experts

There are a variety of second-story deck privacy ideas depending on your budget and aesthetic. For starters, you might consider fencing or tall privacy railing that masks a good portion of the open deck. A pergola or an awning can provide additional cover and shade. Outdoor curtains are an easy way to add or remove privacy at your convenience, plus they’re a wallet-friendly way to decorate your deck.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Yes, you can build a deck over your outdoor HVAC unit, but you need to leave at least 5 feet of vertical clearance above the unit. If you don’t want your deck to be that high off the ground, you could build a floating deck in another part of your yard—again, as long as you leave at least 4 feet of horizontal space between the deck and your AC unit.

No, you don't need to stain Ipe decking, although you can if you want to change the color. You will, however, need to apply a UV coating if you don't want the natural color to fade. Speak to a deck staining specialist near you to discuss the best options if you want to stain your decking. And remember that you’ll need to seal your Ipe wood deck annually to protect it from scratches and Mother Nature.

Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.

The Satanta, KS homeowners’ guide to deck cleaning services

From average costs to expert advice, get all the answers you need to get your job done.