Get matched with top sink installation pros in Pratt, KS

Depending on the issue, you have a good shot at fixing a leaking sink yourself. If you have some plumbing experience or are comfortable with DIY jobs, you can clean the P trap, tighten nuts, replace washers, and replace shut-off valve stems on your own. For more complicated jobs, such as repairing a garbage disposal, calling a pro may be the way to go.

Yes, plumber's putty ensures a solid bond between the drain assembly and sink. Silicone is a good alternative if you prefer not to use plumber's putty. However, plumber's putty typically isn't visible from the outside of the drain, as you can wipe away any excess when done.

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway. 

Install the sink between 30 inches and 34 inches away from the floor. However, this height could be adjusted accordingly for particularly tall or short residents. To accommodate wheelchair users, the vanity should leave a space underneath that is at least 29 inches tall, 30 inches wide, and 25 inches deep.