Get matched with top sink installation pros in Larned, KS

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway. 

Hiring an emergency plumber is expensive because of the urgency and inconvenience, but there are a few things you can do to help keep costs down:

• Minimize water damage by shutting off your water main 

• Clean up pooling water immediately to reduce damage and mold growth

• Avoid using fixtures if you have a clog or septic system backup

• Verify that your plumber is licensed before hiring

• Call a few plumbers for estimates if you can afford a short delay in getting service

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Today’s standard sink stopper size is 1.5 inches. However, you can still find different sizes if your house uses an older sink stopper. Other sizes you can find in most hardware stores include one inch, 1-1/4 inch, 1-3/8 inch, 1-5/8 inch, 1-7/8 inch, 2 inch, 2-1/4 inch, 2-3/8 inch, and 2.5 inch.