Get matched with top ceramic tile pros in Oberlin, KS

On average, tiling a bathroom involves about 12 hours of labor, usually spread over two to three days to accommodate prep work and curing times. A professional tiler can often complete the installation in 6 to 8 hours, whereas a DIYer might take 10 to 16 hours. The total project time is influenced by factors like the bathroom layout, tile type, and necessary prep work, such as removing old tile. The process includes specific timelines for different areas; for example, tiling a floor takes about six hours, while a shower area can take six to ten hours. It is essential to allow for adequate curing time—typically 24 hours each—for the mortar, grout, and caulk, which is why the project extends over several days.

There are no unbreakable rules of design, but experts recommend against using large tiles in areas with poor subflooring where they’re more prone to cracking, in areas where the floor isn’t entirely level, over raised areas or dips, and in bathrooms where budget is the primary concern. The size of your bathroom shouldn’t be a reason not to use large tiles; in fact, larger tiles, also known as slab tiles, can be a modern and sleek choice for bathroom floors and walls.

Yes, you can tile a shower as a DIY project, and you can save hundreds of dollars in labor costs by doing so. However, you’ll need to rent or buy quite a few tools and supplies for the job, including a saw, tile nippers, and a new shower pan. In terms of the work itself, you should be prepared to tackle a variety of different tasks, including measuring and ordering materials, removing old tile, waterproofing the wall, adding rows of tile, grouting, and more.

The best bathroom floor tiles are strong enough to withstand the weight of a clawfoot tub. However, professional tile installation is essential. If the tiles are uneven or improperly fixed, they may crack under the pressure. Be careful when installing the tub—if it drops or drags on the tiles, it could easily cause scratches or cracks.