Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Kingman, KS

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Kingman, KS?

Select your specific project to find the pro for you.

Find Drywall insulation pros in Kingman

Avatar for Air Tight Of Kansas
Air Tight Of Kansas
4.5(
13
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Kingman, KS and surrounding areas

Approved

In business since 2000

Free estimates

Warranties offered

"First off the job I was wanting done was a small job. I installed a window in the mud room and when I removed the paneling in the wall to cut the hole for the window, I found unexpected voids in the wall from the previous work. I also put up a stud wall in the west of the mud room. My original plan was to fully insulate with foam the mud room because it was the only room in the house left exposed to outside temperature changes. I expected to pay fully for the work.
Chris, owner and president of Air Tight, came over to give me a proper estimate for the work I wanted done. I showed Chris all that I wanted done from the garage end first and then I showed him the wall with the newly installed window. He noticed the voids in the wall and was surprised because his company "does not do substandard work," as Chris put it. I was prepared to pay for the new work I wanted done, but he told me Air Tight of Kansas would do it for free.
Air Tight of Kansas stands behind their work more than a 100%. I could not be happier with the insulation. The house stays  warmer in the winter and cooler in the summer with the new heating and cooling system without sky high bills. There is no more creaking or popping with the change in temperature any longer. As an added bonus to the foam insulation, there is less movement do to strong winds, one can hardly hear the wind or rain for that matter.
The employees are excited about their product and that excitement I picked up on at the Home Show, where I was introduced to foam installation as a retrofit option. The cost was reasonable and I expect to pay less in gas and electricity for heating and cooling over the next few years.
I highly recommend Air Tight of Kansas for new construction and remodeling for your insulation needs.
"
Residential Home
Metal Buildings
Metal Buildings
Metal Buildings
Metal Buildings

+2

Response time2 days
Response rate100%
10 neighbors recently requested a quote
Flint Rock Construction
3.6(
4
)
Injection Insulation - Install

Serving Kingman, KS and surrounding areas

Approved

In business since 2009

Free estimates

Credit card accepted

We take pride in the quality of work and customer satisfaction that we give each and every customer! We are known to pay exquisite attention to detail while making customer satisfaction our top priority. Call us today to learn more about how we can help you!

Response time3 days
2 neighbors recently requested a quote
Recommended by75%of homeowners
Saline Valley Insulation
5.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Kingman, KS and surrounding areas

In business since 2017

Free estimates

Small jobs welcome

We pride our company on reliability, communication, integrity, and quality work. We strongly believe in giving our absolute best in all our projects, no matter how big, or small. We are experts in our trade and will always keep you educated on your task or project. We look forward to earning your business.

21 neighbors recently requested a quote
Avatar for Vantage Point Exteriors
Vantage Point Exteriors
3.8(
122
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Kingman, KS and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"This is the 2nd time I have used VantagePoint Exteriors to install windows for me.  First time was in a condominium and from an Angie's Big Deal.  Loved the windows and they did a good job so used them again when I bought a house.  I gave a B on price but they are competitive with other companies.  Double hung, double paned windows are just plain expensive.  The windows are awesome and are Heartland windows.  But windows are only as good as they are installed.  My crew (Willy, Justin, and Anthony) were truly superior. I was there the entire time and I know they went above and beyond. I had a beautiful bay window put in where I had a triple window.  It is unbelievably good looking and they had to do extra work because of how heavy it was.  Built knee braces and insulated and trimmed it out in the interior because it needed wider trim. Truly did an great job. Justin and Anthony are hard working, polite, young men. Willy knows everything there is about installing windows (and is a joker too!). It did take almost 2 months for my windows to come in after being ordered but that's just how it is.  I'm sure the window company (in the good ole USA, Iowa) is busy because they truly make a great product. VantagePoint now does siding also which they did not do when I had my first windows installed. They are much busier this time around as it is a husband-wife team but they want to do right by their customers.  You may have to ask for something or remind them of something that needs done but it will get done.  They will be back at my house this fall to finish up my last 8 windows.
"
Additional Photos
Before Vantage Point got the call
Another happy homeowner!
Before Vantage Point got the call.
Another happy homeowner!

+38

Recommended by73%of homeowners
Avatar for Hill Foam and Coatings LLC
Hill Foam and Coatings LLC
5.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Kingman, KS and surrounding areas

In business since 2023

Free estimates

We specialize in closed cell and open cell spray foam insulation, roof coatings, and waterproofing on new constructions to remodels, barns, cabins, metal buildings and foundations. Can travel across the United States. Certified and insured

Bedroom insulation
Bedroom insulation
Bedroom insulation
Bedroom insulation
Response time1 day
Response rate100%
Recommended by100%of homeowners
Superior Drywall And Insulation
2.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Kingman, KS and surrounding areas

In business since 1987

Free estimates

Credit card accepted

Superior Drywall and Insulation offers fast, friendly and courteous service. We use only the best products and are always eager to answer your questions and concerns. We have built our reputation on our commitment to providing quality service, which has earned us an impressive reputation with many valuable customers. We take pride in delivering value through top quality, dependable work with excellent price and reliable, honest service.

Response time5 hrs
Recommended by100%of homeowners
Showing 1-10 of 15
Drywall Insulation questions, answered by experts

Some textures are easier than others to DIY, but the short answer is yes, you can absolutely texture walls yourself. You’ll need certain materials, like a trowel or paint sprayer, but the most important things you’ll need are patience and time. DIYing wall texture can save money and be a fun, messy project, but homeowners need to know that adding texture to a wall isn’t a quick project. 

Plastering lasts for around 15 to 20 years without needing repairs or maintenance in most cases, and with proper upkeep, plastering can last a lifetime—sometimes more than 100 years. Plaster repair costs between $1 and $3 per square foot, and you may need these services once every 15 to 20 years or so unless you have a harsh climate where humidity changes are a constant issue. You can also opt to skim-coat plaster for between $0.90 and $1.30 per square foot, which may serve you better in the long run.

Venetian plaster is a highly durable wall finish that becomes a rock-like substance once dried, making it last longer than most other wall finishes. Its lifespan can range from decades to centuries, potentially lasting a lifetime. Key factors influencing its longevity include the quality of the initial application, whether it's properly sealed against moisture, and how the wall is maintained and treated (e.g., how often it is touched or bumped). Due to its mineral content, it can also develop a patina over time.

Beadboard is a decorative element and lacks the structural integrity of drywall. It cannot hold much weight and is not meant to be used as an insulator or moisture barrier, like drywall is. In almost all cases, beadboard is placed over an existing wall surface which, in modern days, is usually drywall, but decades ago could have been wood paneling.

Although they are used for similar tasks, spackle and joint compound are not the same. Joint compound, also known as drywall mud, consists of limestone and gypsum and is primarily used for large-scale projects like taping and finishing seams on new drywall. Spackle is composed of gypsum and binding agents, making it a thicker compound best suited for small wall repairs like filling nail holes or cracks, as it dries quickly and is easy to sand. For small repairs, either product can be suitable. However, you can use joint compound for small jobs in place of spackle, but you cannot use spackle for large-scale taping and mudding projects.

The Kingman, KS homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.