Get matched with top marble restoration pros in Downs, KS

Yes, a granite countertop can be cut in place. However, learning how to cut a granite countertop in place is a lot trickier than cutting granite in an open, well-ventilated space. You’ll also need to protect everything in the surrounding area (like your kitchen cabinets and appliances), but even that might not be enough to prevent dust from getting stuck in tight spots. If you absolutely must cut a granite countertop in place, consider hiring a pro to get the job done in the cleanest and safest way possible.

Silestone® is heat-resistant, so it can handle moderately high temperatures for a short period of time. That said, exposure to high heat can cause serious damage. You should never take a hot pan off the stove and place it directly on your countertop. Temperatures above 300 degrees Fahrenheit can leave marks or discoloration on the surface. Instead, use a trivet.

A water-based, low- or no-VOC sealer is typically a good choice for marble countertops. Choose a sealant that is certified safe for contact with food when applying to kitchen countertops. For high-traffic areas, look for formulas that have heat-resistant and acid-resistant features. While there are economical and convenient spray-on sealers, they don’t coat the surface as effectively as the ones you apply with a pad or brush. 

Cracks are usually repaired using an epoxy filler that matches the countertop's color. The area is cleaned, the epoxy applied, and then polished to blend with the surface, restoring both strength and appearance.