Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Holton, IN

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Holton, IN?

Select your specific project to find the pro for you.

Find Drywall insulation pros in Holton

Avatar for USA Insulation of Indianapolis
USA Insulation of Indianapolis
4.0(
73
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"They did a good job. They ran the vacuum after they were done, they laid down guards to make sure none of the insulation got anywhere else in my home and wore hospital booties so they didn't track anything in. They helped me take down my drapes and made sure that they had guards in the attic so the insulation wouldn't cover the ducts. I was greatly pleased with their work and I can already tell a difference in the temperature in my home."
Recommended by81%of homeowners
Hershberger Spray Foam
5.0(
7
)
Blown-In Insulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 2019

Free estimates

Emergency services offered

"Nate came out right away and gave me a quote for the work. I thought the quote was reasonable. I checked his references and hired him. The garage attic that I wanted insulated was full of stored items so I needed to move a lot of things in order for him to spray the insulation. With the help of my Grandson I got about half of the items moved down to the main floor. Nate had said that he would cover what I couldn't move and would try to minimize the over spray as much as possible but there would be dust and some over spray. Nate showed up as planned and spent about 7-8 hours spraying the underside of the attic roof and sidewalls of the attic. After finishing he cleaned up as best he could and hauled away all the debris. As I said there was a lot of stored items that he had to work around. My only suggestion to anyone is if you want spray foam and you have a lot of items in the area, either remove it all or take the time yourself to cover the items. Nate did a lot of plastic but still some items got over spray and just a lot of dust that had to be cleaned after he finished. So to save yourself a lot of extra work or risking something be damaged make sure everything is covered before he starts. Nate did a good job, did exactly what he said he would do and was very easy to work with. I would recommend him and use him again."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for American Basement Solutions
American Basement Solutions
4.3(
46
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 1992

Credit card accepted

"It was a small job. They sealed the vents to the crawlspace, then, since there was already solid insulation panels on the walls, put a vapor/moisture barrier, in the form of a tarp, 4 feet wide and as long needed, completely around the crawlspace. It was then sealed to the walls with "nails" and adhesive. This seals the wood frame of the house from the 'Outside", the ground, which is the floor of the crawlspace. A 20 mil thick, quite heavy, "floor" was installed, also in the form of a tarp, It went up the walls about 3 feet and was taped to the 'tarp" on the walls, using a tape made for this application. The piers were wrapped with the same stuff and taped to seal the inside from the outside. the "floor" is also a vapor/moisture barrier, but, heavy enough to walk on if needed. This basically makes the crawlspace another room, rather than the outside. Our house is one year old and was already getting mold on the floor joists. Since the air in the crawlspace will now be heated in the winter and cooled in the summer, just like the rest of the house, the mold and cold (52 degrees) floors we experienced last winter will hopefully be eliminated. We shall see when dumb winter gets here."
Additional Photos
Additional Photos
Additional Photos
Recommended by85%of homeowners
Avatar for Around Town Insulation, LLC
Around Town Insulation, LLC
5.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Holton, IN and surrounding areas

In business since 2019

Free estimates

Credit card accepted

The installers have gone into business for themselves to help people cut cost not to cut corners. We strive to make a name for ourselves with over three decades of combined experience. We take pride in serving our customers and we really enjoy the work we do.\n\nWe perform free inspections and are available 24 hrs a day 7 days a week. Call today to schedule an appointment and we will be happy walk you through the process.\nWe understand that some people may have a busy lifestyle and we strive to meet the expectations of the customer. Our work is guaranteed for quality and efficiency.\n

Insulation
Insulation
Insulation
Insulation
Insulation

+3

Response time20 mins
Recommended by100%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 1971

Credit card accepted

"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Avatar for DWC Restoration Inc
DWC Restoration Inc
4.4(
83
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Nate showed up immediately after I called with weather damage issues.  He walked me through the options and was there to discuss issues when my insurance adjuster came out.  He was amazing and professional.  Couldn't ask for a better experience and highly recommend!"
Recommended by83%of homeowners
Avatar for Elite Stucco & EIFS Solutions
Elite Stucco & EIFS Solutions
4.1(
18
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 2005

Free estimates

Emergency services offered

We want to keep our customers safe, we can come out and do a FREE estimate and the customer does not need to come meet us outside. We will then send the estimate via email. WE FOLLOW SAFE DISTANCING PRACTICES Call us at 317-413-6654 Specialising in Commercial and Residential Exterior Repair, Restoration and installation of traditional Stucco, Synthetic Stucco and EIFS, waterproofing, Painting exterior, Luxury limestone Fireplaces and now Epoxy Flooring.

After restoration and Limestone finish
Before restoration
After restoration and limestone finish
Before restoration
Additional Photos

+222

Recommended by100%of homeowners
Avatar for Maximus General Contracting LLC
Maximus General Contracting LLC
4.4(
135
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Holton, IN and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"Eric was great to work with!  He came out and gave me an estimate the day after I called.  The quick response was crucial for me since I am trying to sell the house and the roof issues popped up during the inspection.  He was willing to work with me and I feel gave me a great price on the job.  I couldn't believe his crew got the entire roofing job done in one day.  It looks great and best of all, they cleaned up afterward.  You can tell Eric knows what he is doing and he obviously takes pride in the work his company does.  I wholeheartedly recommend him if you need roofing work done. 

He was also able to repair some drywall in the garage at the same time the roof was being done.  His drywall finisher is excellent and did a super job.  It is often difficult to make a repair look as good as the original work but he was able to do that.  It is especially difficult to repair a textured ceiling and to blend it in with the existing ceiling but it looks better than I expected it would.  Great job!

Update (June 2014) - We sold the home and during the home inspection, the inspector said that was the best roofing job he had seen!  We were pleased with the work ourselves but it is always nice when a professional confirms what you thought."
Recommended by92%of homeowners
Showing 1-10 of 21
Drywall Insulation questions, answered by experts

Whether you can reuse a drywall anchor depends on its type, material, and how it is removed. Plastic anchors, such as expansion or self-drilling types, are generally considered single-use because they are designed to expand and are likely to break or become deformed upon removal. Metal anchors, like toggle bolts, are more durable and can often be reused if they are not damaged during extraction. However, with toggle bolts, the toggle mechanism can fall inside the wall when the bolt is removed, making it difficult to retrieve. If an anchor is damaged or must be cut for removal, it cannot be reused regardless of its material.

If the holes in the plaster are small, you can fill them with layers of patching plaster until they’re filled. After it dries, you can sand the plaster and paint over it. If the hole is much larger, consider using bonding plaster first and then a layer of patching plaster, completing the process with sanding and a layer of paint.

The time it takes for thinset to dry is determined by your room’s ambient temperature and humidity levels. Assuming the average humidity level is around 40% with an average temperature of 70 degrees Fahrenheit, thinset can dry within 48 hours. Lower temperatures and higher humidity can extend the curing process beyond 72 hours, while high heat and zero humidity can shorten the curing process. However, thinset can crack if it dries too fast.

Metal corners, often referred to as corner beads for square corners, are used on drywall installations to provide structural reinforcement to vulnerable outside corners. Their usage safeguards against chipping, denting, or other forms of damage, enhancing the overall durability of the wall. Metal corners also offer a precise and straight edge that facilitates sharp and clean lines, crucial for achieving a polished and professional finish.

Applying spackle is a simple DIY project that most people can complete in just a few hours. Even homeowners who have little DIY experience can complete this project in an afternoon. However, if you're uncomfortable with the project or don't have the time, you can always hire a pro to help.

The Holton, IN homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.