Get matched with top structural engineers in Chandler, IN

Squeaky floors don’t always mean structural damage. Usually, it’s caused by friction somewhere inside your floor—whether it’s a loose floorboard or a gap between the subfloor and joists. If there is structural damage, you’ll notice other signs like soft or sagging floors, cracks that go from the wall to the ceiling, and horizontal cracks on your foundation.

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. 

Structural engineers typically conduct inspections during a home sale or renovation, looking for signs of structural damage in various structures throughout the building, such as load-bearing walls, joists, beams, roofing trusses, foundations, and chimneys. Some of the warning signs that structural engineers check for include:

• Dry rot

• Infestation

• Shifting or cracking foundations

• Erosion

• Water damage

• Sagging, shifting, or damaged walls, ceilings, or roofing support

Foundation cracks that are 1/8 inch wide or less, aren’t uneven across the gap, and don’t continue widening over time are usually just normal settling cracks and don’t suggest structural issues. Horizontal cracks and stair-step cracks on foundation walls, any cracks that continue widening, are wider than 1/8 inch, or where one side juts out beyond the other, are often indicative of structural damage.