Best countertop and backsplash pros near Sycamore, IL

Engineered stone countertops range in price between $60 and $200 per square foot. The three main types are quartz, recycled glass, and sintered stone. The most affordable is sintered stone, which is ideal for outdoor kitchens and costs $60 to $100 per square foot.

Recycled glass countertops fall in the middle at $65 to $140 per square foot and offer a very distinct look. Meanwhile, quartz counters are on the higher end of the price range at $50 to $200 per square foot. Popular quartz options mimic the look of natural stones like marble and granite.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Formica® is a brand name for the laminate countertops it produces. Laminate is the generic term for a countertop material made from layers of paper topped with an image layer, all compressed under high pressure to form a solid, easy-to-maintain surface. Other brands that produce laminate countertops include WilsonArt® and Arborite®.

When comparing Formica to other laminates, the choice often comes down to personal preference. Formica is a popular brand known for its durability and affordability. Due to its brand recognition, it may be slightly more expensive than generic laminate options, but the name often carries an expectation of a certain quality standard.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.