Get matched with top countertop and backsplash pros in Oswego, IL

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Formica® is a brand name for the laminate countertops it produces. Laminate is the generic term for a countertop material made from layers of paper topped with an image layer, all compressed under high pressure to form a solid, easy-to-maintain surface. Other brands that produce laminate countertops include WilsonArt® and Arborite®.

When comparing Formica to other laminates, the choice often comes down to personal preference. Formica is a popular brand known for its durability and affordability. Due to its brand recognition, it may be slightly more expensive than generic laminate options, but the name often carries an expectation of a certain quality standard.

The best tool for cutting countertops depends on the type of countertop material. For some softer materials, like laminate (Formica) and butcher block, you can use a hand saw, but most experts recommend power saws like circular saws, since these make the job go faster and easier and give more even results. However, power saws and circular saws are dangerous if used incorrectly, and they can be so powerful that they damage or chip laminate, stone, and other types of countertops. For this reason, you should take safety precautions and use best practices to prevent damage.

The resin should be periodically sealed to help prevent it from wearing down or becoming porous. Very sharp or very hot objects can damage the resin surface, and there’s no way to fully repair it if that happens, so we recommend treating the counters well.