Get matched with top locksmiths in Mount Pulaski, IL

You may be able to get a broken key out of a lock by yourself, depending on the situation. If a portion of the key is still protruding from your lock, try lubricating the keyway and using pliers or even a bobby pin to pull the key out of the hole. If you have jigsaw blades handy, you can also try using those to grab onto the stuck key and pull it out. 

But, if neither option works or you can’t reach the key, your only option is to call a locksmith for help. 

Rekeying your own locks is a low-cost task that prevents you from having to replace the locks themselves completely. The first couple of times you rekey a lock may be challenging because this is an intermediate DIY task. You can purchase a rekey kit from most hardware stores, but make sure you’re buying the kit from the brand of lock in your home that you’re going to rekey. 

Over time, latch components may wear out or get grimy, leading to this problem. First, check for dirt, dust, or debris in the latch mechanism to ensure smooth operation. Use an aerosol duster and lubricant to clean and loosen. You may also need to tighten the screws in the component, adjust the strike plate, or replace the lock. If none of these steps resolve the problem, consult a professional locksmith.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.