Get matched with top snow removal pros in Moro, IL

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.

DIY snow removal is entirely free, except for the cost of a shovel. However, it may not always be the best option for large driveways and areas with heavy snowfall; it’s strenuous work and can take a long time. Other wallet-friendly ways to remove snow include rock salt, hot water, a de-icing agent, or a leaf blower. 

Removing snow from your roof can help prevent ice dams, but the best thing to do is address insulation issues in your attic. If you do decide to remove the snow manually, you should always use a roof rake rather than a shovel. You shouldn’t climb your snowy roof in any circumstance, and roof rake allows you to remove the snow from the ground or a ladder. For the best results, remove snow as soon as possible after it falls.

Both rock salt and ice melt are naturally occurring salts. Rock salt is sodium chloride, which is the same as table salt. Ice melt products can be made from a combination of salts like magnesium chloride and calcium chloride or can be those salts alone.

Rock salt comes in large crystals, so it helps provide traction on icy surfaces, whereas ice melt products need to be mixed with sand to provide traction. Ice melt products work at lower temperatures than rock salt, so they might be a better choice if you have a harsh winter climate.