Get matched with top electricians in Chester, IL

The most common type of electrical outlet is a 3-prong outlet, which has two flat blades (one is wider than the other) and a round grounding pin. Older homes typically have 2-prong outlets that aren’t as safe as more modern options and are generally not up to current electrical codes.  Other outlets you can find in your home include 20A, 125 volt varieties for larger appliances like refrigerators or washing machines. 

There are also GFCI outlets, which protect against electrical shock in wet areas, such as bathrooms and kitchens, and arc fault circuit interrupter (AFCI) outlets, which protect against electrical fires caused by arcing.

The light that your ceiling light gives off will largely depend on the type of light bulb that’s installed in it. If you’re looking to brighten a dark room, LED bulbs are the way to go. LED bulbs will emit the most light while also using less energy than standard bulbs. They can last up to 50,000 hours and will need to be replaced much less often than standard bulbs.

An outlet can trip because the circuit it’s on is overloaded, meaning the devices plugged into it are drawing more power than the circuit can safely carry. Another culprit could be because a power surge from a storm or accident caused a problem with your local electrical grid or there’s a short or a fault causing power to run through the circuit in a dangerous or unplanned way.

Yes, one wire is always hot on the 3-way switch, meaning it carries the electricity from the power source to the switch. If you have a 3-wire cable in your home, you have two hot wires, or line wires, coming from the power source. Typically, you’d connect the hot black wire from the power source to the traveler wire and the hot red wire from the power source to the first 3-way switch. For the second 3-way switch, you’d then connect the hot black traveler wire to the switch.