Get matched with top locksmiths in Atkinson, IL

There are different types of deadbolts. The most common type is a single-cylinder deadbolt, which you may recognize on your front door. This type of lock has a keyhole on the outside and a thumb turn on the inside. A double-cylinder deadbolt has two locking mechanisms and requires a key to engage on the inside as well as the outside. 

One of the best tools for removing a stripped bolt is a handy pair of locking pliers. Locking pliers can usually grip onto screws with a broken, rounded, or stripped head and lock in place so that you can loosen even the most stubborn bolt that would otherwise remain hopelessly jammed.

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.

Over time, latch components may wear out or get grimy, leading to this problem. First, check for dirt, dust, or debris in the latch mechanism to ensure smooth operation. Use an aerosol duster and lubricant to clean and loosen. You may also need to tighten the screws in the component, adjust the strike plate, or replace the lock. If none of these steps resolve the problem, consult a professional locksmith.