Get matched with top sewer cleaners in Mackay, ID

It’ll take 20 to 30 minutes to unclog a sewer line using a drain snake or drain cleaner. If you hire a professional, you should expect them to be on-site for three hours or less. In addition to clearing the clog, they’ll do other routine inspections, which adds to the overall time (and cost) required.

You could be smelling sewer gas in your kitchen because of a dry P-trap, clogged vent pipe, or leaking plumbing seals. If you smell a rotten egg odor, check your sink’s P-trap and plumbing connections first. A clogged or damaged vent pipe can trap sewer gas and push it back into your kitchen through the plumbing pipes. Loose or deteriorated seals around drainpipes can also allow sewer gas to leak out. If you can’t find the source, call a local plumber for expert help.

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

• Snaking or rodding: $100–$250

• Hydrojetting: $350–$600

• Chemical treatments: $600–$1,000

• Repair or replacement: $1,000–$7,500

While some chemical drain cleaners with hydrochloric acid can dissolve hair, this method is not recommended as it can also destroy your plumbing pipes. A common DIY alternative is using baking soda and vinegar, which can help break down the clog but will not actually dissolve the hair. The best and safest method for clearing a hair clog is to remove it manually. You can use a drain snake, a straightened wire hanger with pliers to fish out the clog, or have a plumber use a professional auger for more severe blockages.