Get matched with top floor polishers in Carmen, ID

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

You should strip and wax hardwood floors every six months to two years. The actual length of time between stripping and waxing depends on the wear and tear that the floors see. Stripping and waxing floors can help repair hardwood floor damage and give the room a fresh look.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

No, you cannot use bleach on Dekton. Avoid harsh chemicals when cleaning and treating Dekton. Such chemicals are unnecessary since Dekton is highly stain-resistant and nonporous. Instead, use a mild solution of water and soap or vinegar when cleaning your Dekton countertops and dry thoroughly with a clean cloth.