What PSI should you use to clean stucco siding?

• <div><p>When cleaning stucco siding, it is recommended to use a pressure washer with a psi (pounds per square inch) between 1,500 and 2,000. This range provides sufficient power to remove dirt and grime without causing damage to the stucco surface. It's important to avoid using excessive psi as it can chip or crack the stucco. </p><p>Using a wider spray nozzle and keeping a safe distance of about seven to 10 feet from the siding helps ensure a gentle and effective cleaning process. Always follow the manufacturer's guidelines and adjust the psi accordingly based on the condition of your stucco and the specific requirements of your pressure washer.</p></div>

Get matched with top stucco pros in Mcgregor, IA

Q: Can you stucco over brick?

• <div><p>Yes, you can <a href="https://www.angi.com/articles/can-you-stucco-over-brick.htm">apply stucco directly over brick</a>, and the rough texture of the brick should be enough for the stucco to adhere to, even without a binding agent. Just be sure to clean the brick thoroughly before stuccoing, and allow 72 hours for the first coat of stucco to dry, even if it feels dry to the touch. The thicker portions that fill in the mortar joints will cure more slowly than the thinner portions over the brick faces. </p></div>

Q: Is stucco hard to DIY?

• <div><p>Stucco is very challenging to DIY, so it&rsquo;s always best to leave the work to professional stucco contractors. The same recommendation applies to <a href="https://www.angi.com/articles/cost-to-paint-stucco-house.htm">painting a stucco house</a>, which should be left in the reliable hands of a professional exterior painter. Inexperienced DIYers can make several critical mistakes during stucco application, such as:</p><ul><li><p>Failing to apply sufficiently thick layers for longevity and water resistance</p></li><li><p>Uneven application</p></li><li><p>Uneven texture across the exterior</p></li><li><p>Mixing the stucco improperly, leaving a weak structure</p></li><li><p>Failing to texture properly in between coats, leading to cracking and chipping</p></li></ul><p></p></div>

Q: What’s the easiest way to remove stucco?

• <div><p>The easiest way to remove stucco is to use a circular saw with a diamond blade to cut small squares out, pry them off, and then cut the metal lath behind it with tin snips. It&rsquo;s possible to do everything with a hammer and a crowbar, but it will take significantly longer and will wear you out more quickly. Plus, you&rsquo;ll have a higher risk of damaging windows, hidden siding, and sheathing if you go the less precise route.</p></div>

Q: What size drill bit should I use for stucco?

• <div><p>You can use small bits that are up to 3/8 inch in diameter, or larger bits that are 1/2 inch or more in diameter. Make sure the bits you use are coated with carbide or diamond; this information is usually visible on the package. You can also use hole saw bits to drill into stucco.</p></div>

There are 0 highly-rated local stucco pros.

Find Stucco pros in Mcgregor

Hampton Enterprise LLC

254 W Lawrence Harris Hwy

3.40(

)

Hampton Enterprise LLC

254 W Lawrence Harris Hwy

3.40(

)

36 years of experience

Our mission at Hampton Enterprise LLC is to provide clients with superior customer service, quality work and speedy service in all aspects of their home improvement needs. Licensed, insured and trusted since 1989; come discover the Hampton difference today! We specialize in the installation and repair of Windows, Doors, Flooring, Sinks, Bathtubs, Showers, Sprinkler Systems and much more. We also offer Interior and Exterior Home Painting, Custom Welding Fabrication and Carpentry.Localy in your area just call and i will call back with a local number thank you . from James Hampton AL.Dothan 334-648-3817, AL Birmingham 334-648-3817, AL Huntsville 334-648-3817, AL Mobile 334-648-3817, AL Tuscaloosa 334-648-3817, AL Montgomery 334-578-4761, AR Little Rock 334-648-3817, AZ Phoenix 334-648-3817, CA LosAngeles/Sacramento 334-648-3817, CO Denver/Colorado Springs 334-648-3817, CT Hartford 334-648-3817, DE Dover 334-648-3817, FL Tallahassee 334-648-3817, FL Cape Canaveral/ Cocoa 334-648-3817, FL. Destin 334-648-3817, FL Gainsville 334-648-3817 Fl Jacksonville 334-648-3817, FL Orlando 334-648-3817, FL Panama City 334-648-3817, FL Tampa 334-648-3817, FL Miami 334-648-3817, GA Atlanta 334-648-3817, GA Albany 334-648-3817, GA Augusta 334-648-3817, GA Columbus 334-648-3817, GA Macon 334-648-3817, GA Valdosta 334-648-3817, IA Des Moines 334-648-3817, ID Boise 334-648-3817, IL Chicago/Springfield 334-648-3817, IN Indianapolis 334-648-3817, KS Levenworth/Topeka 334-648-3817, KY Frankfort 334-648-3817, LA New orleans/Baton Rouge 334-648-3817, MA Boston 334-648-3817, MD Annapolis 334-648-3817, ME Augusta 334-648-3817, MI Detroit/Lansing 334-648-3817, MN Saint Paul 334-648-3817, MO kansas City/Jefferson City 334-648-3817, MS Jackson 334-648-3817, MS Biloxi 334-648-3817, MS Gulf Port 334-648-3817, MT helena 334-648-3817, NC Raleigh 334-648-3817, ND Bismark 334-648-3817, NE Lincoln 334-648-3817, NJ Trenton 334-648-3817, NM Santa Fe 334-648-3817, NV Carson City 334-648-3817, NV Las Vegas 334-648-3817 NY Albany 334-648-3817, OH Columbus 334-648-3817, OK Oklahoma Ciy 334-648-3817, OR Salem 334-648-3817, PA harrisburg 334-648-3817, RI Providence 334-648-3817, SC Columbia 334-648-3817, SD Pierre 334-648-3817, TN nashville 334-648-3817, TX Austin 334-648-3817, UT Salt Lake City 334-648-3817, VA Richmond 334-648-3817, VT montpelier 334-648-3817, WI Madison 334-648-3817, WV Charleston 334-648-3817, WY Cheyenne 334-648-3817

"They guys suck."

Penny S on February 2024

"They guys suck."

Penny S on February 2024

Stucco questions, answered by experts

Yes, you can apply stucco directly over brick, and the rough texture of the brick should be enough for the stucco to adhere to, even without a binding agent. Just be sure to clean the brick thoroughly before stuccoing, and allow 72 hours for the first coat of stucco to dry, even if it feels dry to the touch. The thicker portions that fill in the mortar joints will cure more slowly than the thinner portions over the brick faces.

Stucco is very challenging to DIY, so it’s always best to leave the work to professional stucco contractors. The same recommendation applies to painting a stucco house, which should be left in the reliable hands of a professional exterior painter. Inexperienced DIYers can make several critical mistakes during stucco application, such as:

Failing to apply sufficiently thick layers for longevity and water resistance
Uneven application
Uneven texture across the exterior
Mixing the stucco improperly, leaving a weak structure
Failing to texture properly in between coats, leading to cracking and chipping

The easiest way to remove stucco is to use a circular saw with a diamond blade to cut small squares out, pry them off, and then cut the metal lath behind it with tin snips. It’s possible to do everything with a hammer and a crowbar, but it will take significantly longer and will wear you out more quickly. Plus, you’ll have a higher risk of damaging windows, hidden siding, and sheathing if you go the less precise route.

When cleaning stucco siding, it is recommended to use a pressure washer with a psi (pounds per square inch) between 1,500 and 2,000. This range provides sufficient power to remove dirt and grime without causing damage to the stucco surface. It's important to avoid using excessive psi as it can chip or crack the stucco.

Using a wider spray nozzle and keeping a safe distance of about seven to 10 feet from the siding helps ensure a gentle and effective cleaning process. Always follow the manufacturer's guidelines and adjust the psi accordingly based on the condition of your stucco and the specific requirements of your pressure washer.

You can use small bits that are up to 3/8 inch in diameter, or larger bits that are 1/2 inch or more in diameter. Make sure the bits you use are coated with carbide or diamond; this information is usually visible on the package. You can also use hole saw bits to drill into stucco.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Mcgregor, IA homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
Aug 14, 2025Aug 14, 2025
How Much Does It Cost to Stucco a House? [2025 Data]
The cost to stucco a house depends on the size of the home, the materials used, the texture, and other factors. Learn more about the costs of this project.
Angi
•
Aug 15, 2025Aug 15, 2025
How Much Do Stucco Inspections Cost? [2025 Data]
Get transparent stucco inspection cost info. Learn what impacts price, how to save, and what to expect before hiring a pro for your stucco inspection.
Kelly Weimert
•
Jan 6, 2025Jan 6, 2025
How Much Does It Cost to Repair Stucco Siding? [2025 Data]
When damage occurs, don’t let stucco repair costs catch you off guard. Our cost guide lays out average prices for materials, labor, and more.
Rachel Hoffman
•
Jun 24, 2025Jun 24, 2025
Stucco vs. Brick: Pros, Cons, and Costs
Stucco and brick are popular exterior siding options. Learn the key differences between stucco and brick so you can choose the right one for your home.
Anna Baluch
•
Jun 25, 2025Jun 25, 2025
Top Questions to Ask a Stucco Contractor
If you're wondering who to hire to install or repair stucco, this guide to the best questions to ask a stucco contractor will help you find the right pro.
Rachel Hoffman
•
Jun 27, 2025Jun 27, 2025
EIFS vs Stucco: What Are the Main Differences?
Traditional stucco and synthetic stucco are two excellent options for your home. Both materials can last 50 years or more, and can provide excellent protection for your home against the elements.