Get matched with top door pros in Thunderbolt, GA

Installing a dog door is generally a straightforward process that handy DIYers may feel comfortable attempting on their own. Because the process usually involves cutting a hole in your existing door or wall, some homeowners may prefer to hire a handyperson who has experience with this type of installation to ensure the job is done right.

If you took measurements of the door and can’t find the correct size in the store, you may need a custom-size screen door. Many door manufacturers produce doors fit-to-size using individualized dimensions. Another option, if the door opening is smaller than standard, is to have the door frame opening cut larger to accommodate a standard-sized door.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.