Get matched with top stucco pros in Pelham, GA

The easiest way to remove stucco is to use a circular saw with a diamond blade to cut small squares out, pry them off, and then cut the metal lath behind it with tin snips. It’s possible to do everything with a hammer and a crowbar, but it will take significantly longer and will wear you out more quickly. Plus, you’ll have a higher risk of damaging windows, hidden siding, and sheathing if you go the less precise route.

Fiber cement siding is one of the lowest-maintenance options. The material’s formula is resistant to insect activities, moisture, and most physical impacts. Vinyl and aluminium siding is also fairly easy to upkeep. All these low-maintenance options only require basic surface cleaning, caulking, and regular gutter maintenance to prevent water dams from forming. 

Stucco is considered a type of cladding because it includes a built-in ventilation layer, a weatherproof membrane beneath that, and, often, a layer of insulation to improve building efficiency. The multiple layers of stucco—the scratch coat, the brown coat, and the finish coat—also create a more complex building membrane, so it’s more accurate to call it cladding. However, homeowners and contractors alike refer to stucco as siding.

On average, EIFS costs more than traditional stucco, both due to its complex materials and tricky installation. You'll pay between $7 and $9 per square foot for traditional stucco installation and $8 to $14 per square foot for EIFS. Contact a local siding contractor to get an accurate estimate for EIFS or stucco installation based on your project specifications.