Get matched with top backsplash installation pros in Helena, GA

Generally speaking, it is better to cut tile wet when using a fast-moving wet saw to reduce dust and chipping. However, tile can be cut dry when using just about any cutting tool. Dry cutting will result in a bigger mess and may increase the risk of chipping or cracking, but if you’re just making small cuts, dry cutting is a safe and viable option. Cutting dry also means you can apply tile grout sooner, so it’s better for rushed projects.

Solvents dissolve tile adhesive, but the right solvent for the job depends on what type of adhesive you are trying to remove. For instance, dispersion adhesive requires stronger removers, like bile soap or even paint stripper, but some adhesives, like cement-based products, can come off with water and soap or mortar remover.

No, when done correctly, removing the tile shouldn’t damage the subfloor. However, if there was pre-existing damage to the subfloor from standard use or lack of maintenance, the subfloor may need repairs. For example, if the contractors notice mold growth on the subfloor or an uneven surface, you may need more extensive services before installing new tile.

If you DIY tile removal, remove the tiles one step at a time, individually removing the tile, grout, and mortar to prevent unnecessarily damaging the subfloor. Depending on the age of your home, consider having a professional inspect the subfloor to ensure it’s in good enough condition to lay new tile.

Using caulk is one of the simplest and most recommended methods to finish glass tile edges. It creates an elegant seam between the glass tile and the adjacent area, along with a waterproof seal. With this method, you want to use a caulk color that matches the grout and, along with the grout, compliments the tile. Make sure the caulk line is smooth and even. Alternatively, you can use a bullnose or tile trimming to edge, however, that will also require caulk to seal.