Get matched with top door pros in Flintstone, GA

To move a couch through a narrow doorway, first measure the couch and the doorway to ensure it will fit. For a close fit, you can create more space by removing the interior door; tap out the hinge pins with a nail and shift the door sideways to remove it from its hinges. You may need to turn the couch on its side or move it in separate pieces, if possible. Using furniture sliders can also help you slide the couch through the doorway.

A door sill is the horizontal part of the door frame at the bottom, while a door jamb consists of the vertical parts of the frame on either side. The door sill serves as a threshold, sealing the bottom of the door, while the door jamb provides structural support and houses the hinges and latch. Both are essential components of a door frame, with the door sill acting as a transition point and the door jamb providing stability and functionality.

You put shims between the three-sided frame to which the door hinges are attached and the framing of the rough wall opening. Using shims like this will center your door in the wall opening and allows you to make small adjustments to get your door plumb and level for smooth operation. Your shims and the gap they fill will be covered when you install door trim, so don’t worry too much about the appearance.

The width of your door jamb should match your wall thickness exactly, so it depends on your wall. For standard door openings, the width is equal to the width of a 2-by-4-inch  stud, plus the width of the drywall on both sides—about 1/2 inch each—which comes out to 4 9/16 inches. Block walls and framed walls that use 2-by-6-inch framing require a door jamb that’s 6 9/16 inches. You should always measure your finished wall thickness to get an accurate width for your door jamb material.