Get matched with top holiday decorators in Coolidge, GA

Heavy amounts of snow could be a problem. In many climates, lots of snow on your rooftop can lead to freeze-thaw cycle that create ice dams, which can damage rooftops. But if you’re using shingle clips, this snow poses an additional problem: As it melts and freezes, it can easily dislodge clips you’ve placed on your roof.

You can clean snow off your roof after a fresh snowfall while it’s still lightweight, but brushing off snow can also dislodge your clips. If you get a lot of snow, then roof clips become less viable.

There are many types of Christmas lights to choose from when working with a light installer. The main types available for outdoor lighting are dome, LED, incandescent, and C9, and your lighting professional’s choice will depend on the location and overall design. 

C9 lighting is typically the most expensive option, ranging from $15 to $70 per 25-foot strand. These usually have fewer bulbs per strand, so you might need more than expected to cover a large area. Dome lighting is usually the most cost-effective option, ranging from $6 to $15 per 25-foot strand. These bulbs are smaller and rounder than other options, creating a softer look.

The cost for professional holiday light installation averages around $430, with a typical range of $220 to $675. However, prices can be as low as $100 for simple projector setups or exceed $1,200 for extensive displays. The total cost depends on factors like the display's complexity, your home's size, labor rates in your area, and the type of lights used. For example, installation on a small, one-story home may cost $250 to $600, while a multi-story home over 4,000 square feet could cost $500 to $1,800. Costs can also be broken down by location (e.g., high roofs at $3.50–$6 per linear foot) or by the type of light strand, with prices ranging from $4 for basic incandescent strands to over $60 for color-changing LED strands.

The simplest way to put Christmas lights on any metal surface is by using a magnetic hook or clip. You can also purchase magnetic lights, which should easily stick to any magnetic surface. Keep in mind that not all metals are magnetic. In that case, you’ll need to use a different clip.