Get matched with top drywall pros in Berlin, GA

Whether you apply the drywall mesh before or after drywall mud depends on the type of patch it is. For self-adhesive patches, you’ll put the patch down first and then coat it with mud. Mesh patches that are not self-adhesive will require you to put mud down first and then press the mesh into it, followed by additional coats of mud.

There are a few easy ways to locate a wall stud without a stud finder. First, try knocking on the wall with your knuckles. Most parts of the wall will sound hollow, but when you tap over a stud, it will sound more solid. Alternatively, since studs are spaced 16 or 24 inches apart, you can measure those distances from a corner of the room, which will always have a stud.

To hide drywall edges, you need to properly apply drywall tape and multiple layers of joint compound. These materials hide the seams between drywall sheets and fill the holes from drywall screws, leaving behind a smooth, flat finish to paint over. Apply joint compound smoothly, and finish the job by sanding the walls to make sure you fully hide drywall edges and other imperfections.

Yes, it is possible to DIY install drywall, but it is a deceptively complicated process that can be quite frustrating if you don’t have experience. Prepare to cut and screw drywall, leave the proper gap distance for any seams, never leave the end of a piece of drywall hanging off of a stud, and cut out around electrical boxes and switches. Plus, getting the drywall to look good is challenging, especially when taping and spackling. That’s why it’s usually a better idea to hire a professional drywall installer to ensure high-quality results.