Get matched with top mailbox repairers in Saint Cloud, FL

When water penetrates wood, the wood swells, causing the wood and veneer to separate. This separation creates bubbles on the surface of your furniture. If water spills on wood veneer, it needs to be dried ASAP. Surface spills can cause minor damages like white spots and blushing, but if you’re slow to action, you’re looking at more work—and spending—to restore your wood veneer.

The weight capacity depends on the construction method and the quality of the hardware.  Basic side-mount slides often support 50 pounds, but less expensive versions may be rated lower. Properly built drawers with dado joints and heavy-duty, full-extension slides can typically support between 75 and 100 lbs. Be sure to check the manufacturer’s weight rating for your specific drawer slides.

Minor water damage on wood tables can be reversed fairly easily. You can remove stains and light surface damage with a sandblock, then repaint and re-varnish the wood surface. For swollen and rotten wood, you can cut away the damaged parts and use a wood filler as long as the affected area isn’t too much.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.