Get matched with top garbage collectors in Pawcatuck, CT

While the drain connection for a garbage disposal is nearly universal and fits standard sink drain holes of 3 1/2 to 4 inches, the size of the disposal unit itself is not. You must have enough space in the cabinet underneath your sink to accommodate the disposal's housing. A larger model may not fit in a compact cabinet or if the existing plumbing is arranged in an unusual way. Before buying a new garbage disposal, measure the available space under your sink. If you are replacing an old unit, it's often easiest to choose a new model of a similar size.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

On average, a garbage disposal can last anywhere from 7 to 12 years, with many models functioning well for about 10 years. With heavy usage, a motor may last a minimum of five years, while grinding plates will wear down over time. It's generally a good idea to consider a replacement if your unit is approaching the 10-year mark. Other signs that it's time for a new disposal include frequent leaks, persistent clogs, lingering odors, lack of power, or unusual noises. If your unit is not that old, it's worth investigating if a less expensive part, like a rubber seal or a loose hose, is causing the issue.