Best door pros near Norfolk, CT

A prehung door is a door that comes ready to install, already mounted in its frame with hinges and stop molding included. Because everything is factory-aligned, installation is quicker, more precise, and convenient, as you don't need to drill or align the hinges yourself. This makes it a smart option if your current frame is damaged, uneven, or if you're working on a new build. Installation involves fitting the entire unit into the rough opening, shimming and leveling it, and then securing it. If you are replacing an existing prehung door, the process is even simpler, often just requiring you to swap the old unit for the new one and secure it with a few screws. Prehung doors typically cost only slightly more (around $20) than a door slab alone, making them an efficient choice.

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.

Continuous hinges are some of the sturdiest hinges available, which makes sense, given that they provide support along the entire side of the door. These hinges are often used for heavy commercial doors, but are impractically expensive and unnecessary for residential use. Among the hinges commonly used in homes, the ball-bearing hinge is the strongest, and it reduces friction to help heavy doors open more smoothly.

Most slab doors do not have hinge cutouts, making them a complete blank slate. You will have to measure and cut the mortises yourself. You can order a slab door from a home improvement store and ask them to make the cuts, although you still have to take the measurements independently.