Get matched with top countertop and backsplash pros in Mcclave, CO

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Solid surface countertops are fairly resilient. You can use soapy water or ammonia-based cleaners. You can also occasionally use diluted bleach (around 5 tablespoons per gallon of water) for sanitization. Avoid window cleaners because they leave a waxy film that can dull the countertop’s surface. Solid surface material is nonporous, so there’s no need for sealing.

Concrete countertops usually cost more than granite. The average overall cost to install concrete countertops is $50 to $150 per square foot. Granite countertop costs average between $40 and $50 per square foot. While concrete materials might be cheaper than slabs of granite, the labor costs are considerably higher as it takes more time, specialized equipment and skill to form customized concrete countertops.

The frequency for sealing marble countertops depends on several factors, including the quality and color of the stone, the type of sealant used, and the amount of traffic the surface receives. Marble has a porous surface that requires sealing to maintain its shine and resist scratches. As a general rule, you should seal countertops at least once a year. However, for heavily used surfaces, like those in a busy kitchen or family bathroom, you may need to reseal them every three to six months. Conversely, countertops in a rarely used guest bathroom might only need resealing every few years.