Get matched with top roofers in Austin, CO

In some cases, yes, you can put a second roof layer over architectural shingles, but it depends on your home’s structural stability and the local building codes where you live. Architectural shingles are thicker and heavier than standard asphalt shingles, so you may need structural reinforcement or a structural engineer’s inspection before proceeding. Additionally, some building departments don’t allow for two roof layers, regardless of the roof type. You should ask a professional if ripping the old roof off before installing the new one is the best option for you.

The easiest way to tell if your roof vent boot is leaking is to look in your attic for signs of water damage. You might see visible moisture, water spots, or mold on the roof decking around the roof vent or damaged or soggy insulation below it. If you don’t have access to your attic or aren’t sure if the vent boot is the issue, hire a professional to come inspect your roof and figure out the underlying issue.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

You can only overlay a roof once. Any additional layers of shingles will add too much weight and may also violate building codes. Once your roof has had an overlay, you’ll need to have a full roof replacement, including a tear-off of all existing roofing materials, when it’s time for a new roof.