Best driveway sealcoating pros near Three Rivers, CA

You should always power wash your driveway before applying a sealant. At any given time, your driveway could be covered with algae and moss, tire residue, oil and rust stains, and any combination of leaves, twigs, and dirt. If you skip power washing, you’ll be trapping the dirt and grime beneath the sealant and lowering its chance of cementing itself to your driveway. While you can expect the cost to pressure wash your driveway to average between $100 and $350, the few hundred dollars beats an unattractive driveway or paying extra to reapply your driveway sealer.

It is not recommended to seal brand-new asphalt immediately. You should wait at least three months after installation to allow the asphalt time to cure properly. Applying a seal coat too soon can trap the asphalt's oils and chemicals, preventing it from fully hardening. This can result in a weaker surface that is more susceptible to damage. After the three-month curing period, sealing the asphalt is beneficial as it can extend its lifespan by protecting it from water, UV rays, and other damaging elements.

Depending on the product used, you should avoid using your driveway for 48 to 72 hours after sealing it. In general, water-based driveway sealers cure much faster compared to oil-based and solvent-based sealers. Some driveways are even ready in just four to five hours.

If the goal is to reduce your lifetime asphalt driveway repair cost, driveway sealers with oil bases tend to last longer because their composition allows them to penetrate deeper into your driveway's asphalt. This provides deeper, longer-lasting protection compared to water-based products that tend to simply sit on the surface of the asphalt. Knowing that you won't have to redo your driveway as often could leave more room in your budget to cover something like the cost of a heated driveway.