Top-rated siding pros.

Get matched with top siding pros in Seeley, CA

Enter your zip and get matched with up to 5 pros

Find Siding pros in Seeley

Avatar for Sentri Homes
Sentri Homes
2.3(
21
)

Serving Seeley, CA and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"The contracted the work off to a third party. Jon took longer than expected. The windows was installed pretty good from the looks. Communication could have been better with knowing the job will take longer and what types of trims I wanted for the windows. As the contractor that was hired for this job by this company. Did a good job with putting up decent trim. As for the new windows they look great. I purchased the myself and hired sentri homes to install them. I will need to have a my siding on my house redone to be closer to the new windows so the gaps are not so obvious. That was not expected at first. But from old storm windows and not knowing how they were put in originally. There was some unknown things that was learned from the job being completed. I will have the siding of the house slightly done to match really good for what I wanted later on. My only concern is better communication with sentri homes. Overall they were great when I did talk to them."
29 neighbors recently requested a quote
Siding questions, answered by experts

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.

Regularly wash with mild detergent, inspect for rust, and repaint as needed to maintain its appearance.

To calculate how much siding you need for exterior walls, first measure the height and width of the rectangular walls. For the triangular gable walls, measure the width and then the height from the ground to the tallest gable point.

  • For the rectangular walls, the calculation is: length x height

  • For the triangular gable walls, the calculation is: (length x height) / 2

Once you add these up, include an additional 10% to account for any wastage.

A self-etching primer is the best option for aluminum siding. These are specifically designed to bond with bare metals, among other surfaces, leading to better adhesion and corrosion resistance. An oil-based primer is a good alternative if you can’t find a self-etching primer.

You may only need to repaint fiber cement siding every decade or so, but you should clean it every six to 12 months, depending on your local climate. First, wash with a garden hose or similar low-pressure device (not a high-pressure washer, which can damage the material) to remove dirt and any large debris. Then, gently wipe down the surface with a soft brush or cloth in a side-to-side motion, following the grain of the fiber cement.

The Seeley, CA homeowners’ guide to siding services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"