Get matched with top welders in Novato, CA

Q: What household tool can cut a metal pipe?

• <div><p>Your typical household tools will not cut a metal pipe. To cut a metal pipe, you&rsquo;d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It&rsquo;s usually safer to let a pro cut a metal pipe, especially if you&rsquo;re not confident in your skills with a heavy-duty saw. </p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: What questions should I ask a welder before hiring?

• <div><p>There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:</p><ul><li><p>Are you licensed and certified?</p></li><li><p>How long have you been in the welding business?</p></li><li><p>Do you commonly do the type of welding I need?</p></li><li><p>Do you offer any kind of warranty for your work?</p></li><li><p>Do you charge by the hour or by the project?</p></li><li><p>How long do you expect my welding project to take?</p></li><li><p>What steps do you take to minimize errors in your work?</p></li></ul><p></p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Novato, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Novato, CA

*The Angi rating for Welding companies in Novato, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Novato, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on October 23, 2025

Reviewed in October 2025
FL Construction did multiple projects at my home, from a garage reconstruction to decking to electrical to windows. They were very professional and timely. They do a thorough job and stand by their work. The workers are wonderful to work with, very friendly and professional.
F L CONSTRUCTION INC
Request a quote
Reviewed in July 2025
I am a perfectionist and have always done all my own painting, home renovations/upgrades/maintenance/repair, gardening, landscaping and plumbing, and electrical (to code with permits). I built the 230' of the fencing around our property and built two pergolas. I'm 77 years old and I decided...
Ruben Roman Painting
Request a quote
Reviewed in December 2024
Carlos & crew did an exceptional job sheetrocking and mudding a 500sf area that was rife with wonky corners and uneven surfaces. They were fast, efficient and fair priced. Thank you for a great job, I highly recommend!
VRz Drywall
Request a quote
Reviewed in November 2024
I highly recommend TNT Construction and their team. They recently completed a project for me, and I was very impressed with their work. TNT was professional, reliable, and easy to work with. They kept me updated throughout, finished on time, and stayed within budget. The quality of their work...
TNT Construction Services
Request a quote
Reviewed in January 2024
Vince was prompt, knowledgeable, and efficient. He went above and beyond the job spec with electrical and welding assistance; plus he provided anlhable energy efficiency advice. He was professional yet friendly, considerably skilled, and a sure reference for any of our future needs.
RIDGEBACK MECHANICAL
Request a quote
Reviewed in September 2023
As a homeowner for over 50 years, I have used many contractors and construction people and RMW Construction, Inc., is by far the finest in the business. Professional, courteous, efficient, on time and on budget and most of all, reliable and honest. You can't go wrong with RMW Construction, Inc.
RMW Construction Inc.
Request a quote
Reviewed in September 2023
We recently had our bathroom remodeled by Tanoak Construction and we are extremely satisfied with the quality of workmanship. Gant Bowman and Dave Bowman were always available to answer any questions we had and were very transparent throughout the entire process. Finding a local contractor was...
Tanoak Construction, LLC
Request a quote
Reviewed in September 2023
Pat did a great job patching some holes and painting. Thanks!
P G M Construction
Request a quote
Reviewed in July 2023
Brian worked with us to design and build a new Craftsman-style banister for our stairs, which included incorporating four small stained glass squares in the newel post. He also found a welder to create wrought iron balusters to match a design we found online. He had to rebuild the treads, which...
Compass Craftsman, Inc.
Request a quote
Reviewed in June 2023
Jamie Flatt of Custom Works Contracting is extremely knowledgeable, pays attention to detail, and is solution oriented. He looks at the whole project and systematically determines the best resolve to problems presented to him, at the most reasonable cost. I highly recommend using Custom Works...
Custom Works Contracting
Request a quote

Find Welders in Novato

V B Steel Works

4.8(

)

Serving Novato, CA and surrounding areas

Approved

Super Service Award Winner

In business since 2023

Free estimates

Offers commercial services

"Immediately available. Quality welding work. Totally professional."

Response time10 hrs

Recommended by7%of homeowners

Serving Novato, CA and surrounding areas

In business since 2016

Free estimates

Credit card accepted

"Efrain was very helpful in determining the problem and solving how to fix the hand railing. I was very happy with his repair of the handrail and the tile work around the railings post."

break metal cladding around Fleetwood sliders

Response time2 days

Recommended by100%of homeowners

Request Quote

H&S Steel Fabrication LLC

4.7(

)

Serving Novato, CA and surrounding areas

In business since 2022

Free estimates

Credit card accepted

"Responded quick. Came over and showed/explained what I would like done. He got everything done exactly how I pictured it. Very polite and made sure everything was cleaned. Highly recommend and I will be calling back to have him fabricate another project for me."

Recommended by85%of homeowners

Serving Novato, CA and surrounding areas

Emergency services offered

"Joe was very thorough and professional. He did an amazing job and I have already told my friends and family about him. I have also had him do smaller jobs for me like removing old and putting in new toilet. Also Trim a tree in backyard and fix a deck. He's very handy and trustworthy!"

Took off siding and brick ,replaced with plywood and decorative rock

Carpentry flooring remodel guest house in backyard

+98

Recommended by100%of homeowners

Request Quote

Copan builders general remodeling

5.0(

)

Serving Novato, CA and surrounding areas

In business since 2017

Free estimates

"The job was quick and very smooth with no troubles. Great guys and would definitely rehire again if needed! Thanks again, Oscar!"

+80

Recommended by100%of homeowners

Serving Novato, CA and surrounding areas

In business since 2013

Free estimates

Offers commercial services

"Derek was very responsive to the needs of the project! I was happy with his attention to detail!"

Response time1 day

Recommended by100%of homeowners

Request Quote

William Handyman Service

5.0(

)

Serving Novato, CA and surrounding areas

In business since 2022

Free estimates

Emergency services offered

"He and his crew were amazing. The job is well done, in a very timely manner, the cost was quite reasonable, the clean up was excellent. I will hire him again!!"

+24

Recommended by100%of homeowners

Serving Novato, CA and surrounding areas

In business since 2017

Free estimates

"They do very good work. I would definitely recommend this company,"

Response time2 hrs

Recommended by100%of homeowners

Request Quote

Willy's Mobile Welding & Fabrication

3.8(

)

Serving Novato, CA and surrounding areas

In business since 2014

Free estimates

"Excellent work. He is very busy so be prepared to wait but the work was excellent"

Recommended by100%of homeowners

Request Quote

Navarro's Welding & Fabrication

2.4(

)

Serving Novato, CA and surrounding areas

In business since 2015

Free estimates

"no written agrement after asked many times for waranty"

decretive main gate with only outside exposed lock

+24

Response time1 day

Recommended by85%of homeowners

Request Quote

Showing 1-10 of 24

Welding questions, answered by experts

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:

Are you licensed and certified?
How long have you been in the welding business?
Do you commonly do the type of welding I need?
Do you offer any kind of warranty for your work?
Do you charge by the hour or by the project?
How long do you expect my welding project to take?
What steps do you take to minimize errors in your work?

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

The Novato, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Kelly Weimert
•
May 30, 2026May 30, 2026
How Much Does a Pipe Fence Cost? [2026 Data]
Pipe fencing is an extremely strong, durable option for containing horses and other livestock. This guide breaks down the factors that affect pipe fence cost.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Steel Beam Installation
Find who to hire for steel beam installation. Learn who to call, what each pro does, and plan your project with confidence.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.