Get matched with top generator install pros in Mount Shasta, CA

A 10,000-watt generator can run a small to mid-sized central AC unit (typically up to 3 tons or 36,000 BTU) along with a few other appliances. However, larger AC units or additional loads will require a bigger generator. Consult a local generator installer to ensure you add the correct size generator to your home.

Yes, natural gas generators can work without electricity. Natural gas generators are a common type of backup or whole-house generator that operates when the electrical grid isn’t working. The trick is using a transfer switch (which usually needs to be installed with the generator) that safely switches the home electrical system from the power grid to generator power when needed.

As long as they have enough fuel, whole-house generators can run for weeks at a time (400 to 500 hours) without suffering too much wear and tear. However, this type of extensive use isn’t ideal if you want to extend the life of your generator.

Two important points. First, some generators may need you to periodically check oil levels every day or so and refill as necessary for safe operation. Second, if your generator uses a fuel tank, keep it regularly full so it doesn’t suddenly shut off. Many backup generators can run through a full tank in a day when they are powering large portions of a home.

Generator size requirements vary wildly among properties, but typical generator sizes are listed below based on home square footage:

• 1,000 sq ft: 6–9 kW

• 1,500 sq ft: 7–10 kW

• 2,000 sq ft: 10–14kW

• 2,500 sq ft: 12–16kW

• 3,000 sq ft: 16–20kW+

Unfortunately, home square footage isn’t always a good indicator of generator size requirements. Instead, you should call in a professional to discuss which items in your home you’d like to run via your generator. They can calculate peak and average consumption for those items and then size your generator appropriately for optimal performance.