Get matched with top well and pump technicians in Mendocino, CA

It’s possible to fix a broken well pump yourself, but we don’t recommend it. Well pumps are hard to reach and service without the proper equipment, and even if you can reach the pump, it involves working in close proximity to water and electricity, which can be extremely dangerous. Any mistakes made during the repair process could contaminate your water supply or put you and your home at risk. Additionally, some states require that a licensed plumber carry out well pump repair. It’s worth it to hire a professional water pump repair service.

There are other ways to increase well water pressure. You can often increase the pressure by adjusting the valve on your pressure tank. The pressure issue may be the result of build-up along the pipes or a clog in the system, so descaling and unclogging your system can help improve the overall pressure.

If you notice any changes to the water coming from your well, consider that a sign to get a well inspection. For example, if the water is foul-smelling, bad-tasting, cloudy, or discolored, you should call a pro. It’s also a good idea to schedule an inspection if you observe a loss of water pressure, broken equipment, loss of well capacity, or other unusual signs.

The precharged pressure tank should start at around 28 psi. The two pressure settings of note are the cut-in and cut-out pressure. The well pump starts when the tank reaches the minimum cut-in pressure. It turns off when the tank reaches the maximum cut-out pressure. The desired water pressure in the household is usually a few psi above the cut-in number. The difference between the cut-in and cut-out pressure settings should be 20 psi. Typical settings for household applications include 20/40, 30/50, and 40/60.