Best foundation repair specialists near Mather, CA

The average cost to repair a concrete driveway ranges from approximately $830 to $2,800, with a typical project costing around $1,765. The price varies widely depending on the type and extent of the damage. Minor crack repairs can be as low as $0.10 to $0.15 per linear foot and may be a DIY project. More significant repairs are priced per square foot: replacing a damaged slab costs about $6 to $14, while raising or leveling sunken concrete costs $3 to $25. Resurfacing is another option, costing around $3 to $5 per square foot. Factors influencing the total price include the size of the affected area, whether reinforcement is needed, and labor costs.

Most single-story homes don't have foundations strong enough to support a second story, but they can be reinforced for an addition. A structural engineer can assess your foundation and what needs to be done to get it ready. They'll look at any cracks or unevenness in your current foundation and consider any special framing or beams your home needs, especially if it’s in a high-wind or hurricane area.

“To support a second story, many structural engineers will require that you install additional concrete piers in the crawlspace,” says Tschudi. “This involves hand excavating, pouring a large concrete footing—usually with specially coated rebar—and then building concrete piers right up to the girders.”

You can seal a concrete slab by cleaning the surface, filling in any cracks, etching the surface, applying a sealer, and letting it dry. Concrete slabs don't typically need sealing, but you can use a topical concrete sealer if you notice signs of water damage. If you haven't already fixed the cause of the leak, then you'll want to repair the plumbing before you seal a concrete slab.

The best foundation repair method will depend on the issue you’re having, but usually, foundation instability is best fixed using supportive piers, like steel piers or helical piers. A professional foundation repair contractor or structural engineer should always decide what the best course of action is, and even then, it’s imperative that you also take measures to treat the underlying issue as well, like soil erosion or oversaturation from runoff.