Best door repair pros near Madera, CA

Wood putty is an effective solution for repairing holes in wood doors, especially stained ones. For stained doors, it is crucial to match the putty color to the existing finish, as it's difficult to match new stain to old stain. You can buy putty that matches your door's color or blend different shades for a perfect match. For larger holes, you can first fill the void with spray foam and then apply wood putty over it. Another option for large holes is to use spray foam and spackle, and then paint the entire door for a uniform, fresh appearance. If the hole is very large, particularly in a hollow core door, replacing the door may be the most practical solution.

First, make sure you seal or finish your door after installation. There are many different sealants and wood finishes on the market designed to prevent moisture from infiltrating wood surfaces. Additionally, do your best to control humidity around your door using a dehumidifier. Any exterior wood doors should be protected by glass storm doors to reduce water exposure.

Most of the time, constant use will loosen the mounting screws on your doorknob and cause it to loosen away from the door. While this can be annoying, the solution is quick and simple. If you have exposed mounting bolts, simply tighten them with a screwdriver, being sure not to overtighten and bind up the turning mechanism. For doorknobs without visible mounting bolts, first pry off the rose mounting plate or unscrew the set screw before removing it.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.