Get matched with top woodworkers in Lewiston, CA

Q: Do you need a cutting board on butcher block countertops?

• <div><p>You don&rsquo;t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You&rsquo;ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look&mdash;in which case, you may want to use a cutting board.</p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: Can I cope crown molding with an angle grinder?

• <div><p>If you don&rsquo;t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You&rsquo;ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding. </p></div>

Q: Is it easier to cut wood when it’s wet or dry?

• <div><p>Whether or not it&rsquo;s easier to cut wood when it&rsquo;s wet versus dry depends largely on the type of tool you use and the wood you&rsquo;re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw. </p><p>However, you might want to avoid cutting wood entirely when it&rsquo;s wet if you&rsquo;re pruning your tree. Sawing a wet tree that you don&rsquo;t plan on removing can also encourage bacterial and fungal growth and decay.</p></div>

Q: Do I need special lumber for framing a house?

• <div><p>Learning <a href="https://www.angi.com/articles/how-to-frame-house.htm">how to frame a house</a> includes picking the right lumber for the job. Most people will want to pick pine, spruce, or fir for the framing. These types of lumber are affordable and produce sturdy framing for structures. Look for kiln-dried lumber to reduce the risk of shrinkage or insect damage after installation. As part of what&rsquo;s included in framing a house when you hire a professional, the contractor should order the lumber, so you don&rsquo;t have to worry about finding the right lumber.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Lewiston, CA?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Lewiston, CA

*The Angi rating for Woodworking companies in Lewiston, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Lewiston, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on April 20, 2026

Reviewed in April 2026
We hired Granite Peak Home Inspections to perform an inspection on our home. The owner of the company was great to work with! He was very thorough in his assessment of our home and very kindly shared his findings with us. If you’re looking for a home inspection to be performed, I recommend...
Granite Peak Home Inspections LLC
Request a quote
Reviewed in October 2025
The workers were highly, skilled. The paint was high quality. The time frame that needed to be met was reached. The owner was very professional, polite and rendered good communications and service.
Husky Pro Painting Inc.
Request a quote
Reviewed in September 2025
He showed up exactly when he said he would and stayed at least 4 hours late on a Friday to get the job done. Very professional. Much appreciated. I finally found an electrician I can count on in Weaverville. Highly recommend! Thanks Jacob
GRAHAM ELECTRIC
Request a quote
Reviewed in June 2024
Martin with Vista Point Builders was very professional, communicative, and accommodating. We very much enjoyed working with him on our kitchen floor project.
Vista Point Builders, Inc.
Request a quote
Reviewed in May 2024
Great job with acid wash and cleaning
Sandy Bottom Pools LLC
Request a quote
Reviewed in January 2024
Mnm flooring was affordable. they showed up time to do a kitchen of luxury vinyl plank. They came in did it all in one day highly recommend this company to anyone who wants their flooring installed
MnM Flooring
Request a quote
Reviewed in March 2023
James & his crew were friendly, professional & efficient. The job was completed ahead of schedule & within the timeline they said it would be. We're very pleased with the fence & the entire experience
Lassen Fence
Request a quote
Reviewed in January 2023
Bonified Flooring Design was fantastic to work with. Ruben answered my phone calls, promptly, showed up on time for the appointments, and gave us a very detailed bid at a fair price. He started the job on time and did everything he said he would do, even a few extras. Ruben and his crew were...
Bonafide Flooring Design
Request a quote
Reviewed in August 2022
I hired Walker's Home & Commercial Inspections because I was putting my older home on the market and wanted to know what repairs, if any, needed to be completed before selling. Mr. Walker pointed out several deficiencies. There was earth/wood contact below the kitchen window and some...
Walker's Home and Commercial Inspections
Request a quote
Reviewed in July 2022
The owner was very professional and knowledgeable listened to all of our concerns and needs. Definitely recommend them.
Vivid Colors Idaho
Request a quote

Find Woodworkers in Lewiston

She digs

New to Angi

Furniture - Build Custom

Serving Lewiston, CA and surrounding areas

Approved

Throughout my life as an adult I have gone to school for iron working in Reno and went through school for the pipe fitters and plumbers as well as learn carpentry from a couple of my friends on doing remodels

Request Quote

Connor Hufft

New to Angi

Furniture - Build Custom

Serving Lewiston, CA and surrounding areas

Approved

Free estimates

Small jobs welcome

I’m 23, just trying to make some extra money to get better established in life right now. I’ve worked construction for 5 years now and have all my own tools and the experience.

1 neighbors recently requested a quote

Request Quote

The Fix Handyman Services

New to Angi

Furniture - Build Custom

Serving Lewiston, CA and surrounding areas

Approved

The Fix Handyman Service. Give us a call for any and all home repair or renovation needs. Reference available upon request. Insured and experienced professionals.

1 neighbors recently requested a quote

Request Quote

Clear Horizon Home Solutions, Inc.

4.3(

214

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+4 more

Serving Lewiston, CA and surrounding areas

In business since 2011

Free estimates

Credit card accepted

"Luis, did a wonderful job installing a retaining wall, pavers, laying sod and river rock edging for us. We are very satisfied with how lovely everything looks."

Recommended by82%of homeowners

Closet - BuildCustom Cabinets - Build

Serving Lewiston, CA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"quality is always excellent. Delivery has always been on time. this is the third time I have used Arkansas wood door"

Recommended by100%of homeowners

Request Quote

SCOTT'S CUSTOM CABINETS

5.0(

)

Closet - BuildCustom Cabinets - BuildFurniture - Build Custom+2 more

Serving Lewiston, CA and surrounding areas

In business since 2023

Free estimates

Small jobs welcome

"Scott made a super amazing custom piece of furniture for us. My wife had a photo of an idea and he made it to scale. He used quality hard wood, great design and a very nice finish. This piece will last for many years to come and we’re super happy with it. He also used nice hardware that is soft close and heavy duty. Thank you Scott!"

Response time1 day

Response rate100%

Recommended by33%of homeowners

Carport (Wood) - Build

Serving Lewiston, CA and surrounding areas

In business since 1994

Free estimates

Emergency services offered

"The kitchen remodel with Ocean Seven Builders went smoother than we thought it would. Ron stayed involved throughout the process and kept us updated on progress. The quality of the cabinets and flooring is excellent, and the installation looks very precise. Overall, it was a solid experience with a good end result!"

Recommended by59%of homeowners

Request Quote

Repair & Remodel Experts

4.5(

)

Carport (Wood) - Build

Serving Lewiston, CA and surrounding areas

In business since 2007

Free estimates

Credit card accepted

"Darrel was very nice. He arrived at the time he said he would. He was very through and his work was well done."

Recommended by100%of homeowners

Request Quote

Mega Power Electric, Inc

5.0(

191

)

Carport (Wood) - Build

Serving Lewiston, CA and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"We recently had Mega Power Electric Inc install a solar system and panels. The President and provided excellent communication all the way through the process. He even met with us after installation to explain the almost incomprehensible PG&E bill. Although not the least expensive bid, his was competitive and I felt he was as interested in educating me about solar and the various types of panels and inverter systems as he was in selling a system. He demonstrated how the array of panels would meet our energy needs and as opposed to some of the other companies, wasn't selling us more than we needed. We are very satisfied with our solar system and I highly recommended Mega Power Electric Inc."

+32

Recommended by100%of homeowners

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+9 more

Serving Lewiston, CA and surrounding areas

Free estimates

Emergency services offered

"Very good handyman. Professional, punctual, polite. Experienced. Knows what he is doing."

Recommended by96%of homeowners

Request Quote

Showing 1-10 of 30

Woodworking questions, answered by experts

You don’t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You’ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look—in which case, you may want to use a cutting board.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.

Whether or not it’s easier to cut wood when it’s wet versus dry depends largely on the type of tool you use and the wood you’re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw.

However, you might want to avoid cutting wood entirely when it’s wet if you’re pruning your tree. Sawing a wet tree that you don’t plan on removing can also encourage bacterial and fungal growth and decay.

Learning how to frame a house includes picking the right lumber for the job. Most people will want to pick pine, spruce, or fir for the framing. These types of lumber are affordable and produce sturdy framing for structures. Look for kiln-dried lumber to reduce the risk of shrinkage or insect damage after installation. As part of what’s included in framing a house when you hire a professional, the contractor should order the lumber, so you don’t have to worry about finding the right lumber.

The Lewiston, CA homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Sep 26, 2026Sep 26, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.