Get matched with top window and door contractors in Hughson, CA

There are different types of screen materials available when purchasing a screen door, but the two main options are fiberglass and aluminum. Fiberglass is lightweight and affordable, but can stretch out, so it needs to be replaced more often. Aluminum has a higher upfront cost, but is more sturdy. Aluminum can be more difficult to install, even if you know how to replace screen door mesh.

Window screen repair costs an average of $310, with a typical range of $100 to $480. The final price depends on several factors, including the window size, accessibility, screen type, whether the frame needs replacement, and especially the screen material.

The cost of window screen materials varies widely based on durability and features:

• Fiberglass: $35–$200

• Aluminum: $50–$300

• Copper: $90–$850

• Stainless Steel: $45–$400

• Brass: $100–$900

• Solar: $55–$850

• Security: $100–$1,000

• Vinyl: $25–$120

Costs also differ by screen type. For instance, a prefabricated screen might cost only $40, moveable screens typically run $25 to $75, and retractable screens range from $300 to $900. To save money, you can choose more affordable materials like vinyl or fiberglass, opt to rescreen instead of replacing the entire frame, and have multiple screens repaired at once to reduce labor costs.

If your door has interchangeable inserts, you’ll likely want to swap the glass out for a screen during the summer months. The process to do so will vary by door, but you’ll follow these general steps: First, use a flathead screwdriver to pop out the retainer strips—the plastic strips running down both long (and sometimes all four) sides of the door. Then gently pull them out by hand. Carefully remove the glass insert from the door and replace it with the screen. Finally, push the plastic retainer strips back into place, working from top to bottom.

The screen on many screen doors is held in place by screen spline. Screen spline is typically a thin vinyl tubing that fits into the groove of the door’s frame and holds the screen in place. To install the spline on a screen door, you’ll need a spline roller—a tool that presses the spline and screen into the door’s narrow groove. Note that old spline can crack and break, so replacing your screens is a good time to replace the spline, too.