Get matched with top dishwasher installation pros in Hesperia, CA

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.

Yes, you can use vinegar to unclog a dishwasher. To do so, combine 4 tablespoons of white vinegar with 4 tablespoons of baking soda and pour the mixture down your dishwasher’s drain. Let it sit for 15 minutes, then pour a cup of hot water down the drain to flush everything out. Finally, run a rinse cycle on your dishwasher to see if the clog is gone.