Get matched with top masons in Friant, CA

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.

Professionally done brick repointing can last 20 to 30 years, sometimes longer. However, the exact lifespan depends on several factors, including the quality of the mortar, the skill of the mason, and exposure to weather. If you live in an area with harsh weather or frequent freeze-thaw cycles, you may need to repoint more often. Repointing that is done as a DIY project may only last 10 to 15 years. It's time to repoint when you notice signs of mortar failure, such as crumbling or missing mortar, holes, or vines growing between the bricks. Regular inspections can help you catch these issues early.

Painted exterior brick does not usually need sealing. Brick is a porous material, so you don’t want to apply a sealant that could trap moisture inside the bricks and cause erosion and structural damage. The risk of moisture-induced damage after sealing is higher in colder climates where trapped moisture can expand if it freezes. On the other hand, it makes sense to seal really old brick or kitchen backsplashes, where moisture from cooking can weaken the brick.

Certain towns and homeowner associations (HOAs) ban brick mailboxes because of the risk of obstruction. They are sometimes only permitted in cases where four or more homes share a mailbox. Homeowners may need to obtain special permits in some locations. One of the top masonry contractor hiring tips is to ask a local pro if they can show you examples of recent work that meets local code regulations.