Get matched with top door pros in Friant, CA

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

You put shims between the three-sided frame to which the door hinges are attached and the framing of the rough wall opening. Using shims like this will center your door in the wall opening and allows you to make small adjustments to get your door plumb and level for smooth operation. Your shims and the gap they fill will be covered when you install door trim, so don’t worry too much about the appearance.

Doors are made from a variety of materials, including fiberglass, wood, and steel. Fiberglass is an excellent choice if you’re looking for a durable, long-lasting, and energy-efficient option that comes in various colors, although it’s not eco-friendly. Steel provides durability and maximum security but is not eco-friendly or energy-efficient. Wood is an energy-efficient, eco-friendly door solution, but you’ll spend more.

You can determine what size storm door you need by measuring for the storm door. Take the width at the top, middle, and bottom of either your front door or an existing storm door, then measure the height on the left, center, and right of the door. Buy a storm door that matches your measurements' smallest width and shortest height.